压气机叶片型面精密数控铣加工技术应用研究

为了提高压气机叶片型面和进、排气边转接圆角的数控铣加工质量,在工艺、夹具、数控加工模型与程序以及检测方法等方面采取了攻关措施,减小了叶片型面精铣加工的变形,实现了叶身型面的精密铣削加工,对型面采用毡轮修光去除铣削痕迹后,经过3坐标、小半径投影仪等设备的测量,进、排气边转接圆角的形状和型面轮廓度、位置度各项要求的加工质量得到了质的提升,其合格率由20％提高到75％以上,加工效率和刀具耐用度提高1倍以上,使叶身型面精密铣削技术具备了精品叶片批量生产的工程化应用技术基础.     

背压脉动引起的超声速进气道流固耦合振动分析

冲压发动机燃烧室压力脉动对进气道形成背压脉动,影响了进气道内流动的稳定性。采用数值仿真方法,研究了背压脉动作用下超声速进气道内非定常流动与局部弹性壁板的流固耦合振动问题,分析了壁板阻尼对进气道流固耦合振动问题的影响。结果表明,弹性壁板振动形成了"动态空腔"效应,大幅降低了激波串振荡幅值,增加了非定常流动稳定性。其中,无阻尼弹性壁板模型的激波串振荡幅值下降为刚性壁板模型结果的45.6%。通过增加壁板阻尼的方式,能够增强壁板振动的"动态空腔"效应。当刚度比例阻尼系数为10~(-4)时,激波串振荡幅值降为刚性壁板模型结果的43.7%。     

C/SiC复合材料螺旋铣削与钻削制孔效果对比

采用PCD刀具对C/SiC复合材料螺旋铣削与钻削制孔的制孔效果进行了对比研究。在同等加工效率条件下测量了两种制孔方法产生的切削力及切削热,并观察制孔质量。试验结果表明:螺旋铣孔产生的轴向力小于钻孔,约为钻孔的56.9%;孔壁粗糙度及孔径差均小于钻削;钻孔产生的切削热少于螺旋铣削制孔,约占螺旋铣的58.7%,但螺旋铣产生的切削热对材料及刀具的影响小。     

双环预混旋流燃烧室点熄火性能试验研究

为了通过试验方法获得贫油点熄火边界,以双环预混旋流低污染燃烧室为研究对象,分析主燃级径向旋流器的叶片角 度、旋转方向及多斜孔壁火焰筒的冷却孔偏转角等参数对燃烧室点熄火性能的影响。结果表明：主燃级旋流器叶片角度对燃烧室的 点火性能影响不大;火焰筒冷却孔有偏转角且方向与主燃级旋流器旋向相同时的点火性能优于旋向相反时的点火性能;预燃级旋 流器与主燃级旋流器旋向相反时,火焰筒冷却孔有偏转角且方向与主燃级旋流器旋向相同时的点火性能优于无偏转角时的点火性 能,旋向相同时,则无明显影响;火焰筒冷却孔无偏转角时,预燃级旋流器与主燃级旋流器旋向相反的贫油熄火性能优于旋向相同 时的贫油熄火性能。     

基于分解协调移动极值响应面法的多构件结构动态可靠性分析

多个构件装配而成的复杂结构可靠性分析存在计算流程繁琐、计算效率低的问题。基于极值响应面 法、移动最小二乘法和分解协调的策略,提出分解协调移动极值响应面法(DCMERSM),对考虑流-热-固耦 合作用的航空发动机高压涡轮叶盘径向变形进行动态可靠性分析,通过对比直接模拟和分解协调极值响应面 法(DCERSM),对 DCMERSM 在 建 模 特 性 和 仿 真 性 能 方 面 的 有 效 性 和 适 用 性 进 行 验 证。 结 果 表 明: DCMERSM不仅适用于转子机械动态可靠性分析,同时还可以用于复杂机械多构件结构可靠性分析。     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

Mining Spatial Associations with Limited Sensory Information

Abstract

Human navigation in an unknown environment requires an understanding of the spatial relationships of the terrain. For example, a soldier who is on a reconnaissance mission in a new city needs to “know” the spatial layout of the surroundings with high confidence. Oftentimes, this understanding must be acquired within a very short amount of time and with limited sensory inputs. The soldier would benefit from a digital avatar that draws inferences about the spatial layout of the city based on an initial set of observations and guides the soldier either in further exploring the environment or in making decisions based on these inferences. In this paper, we present and evaluate an inductive approach to learning spatial associations using sensory data that is available from the simulation environment of a computer game, Unreal Tournament. We study two kinds of spatial relationships between nodes on a level of a game map: nodes that are placed near each other to satisfy some spatial requirement and nodes that are placed near each other to satisfy the design preferences of a level architect. We show that we can infer both kinds of relationships using an association rule mining algorithm. Furthermore, we show how to use an ontology to distinguish between these relationships in order to discover different types of spatial arrangements on a specific map. We discuss how the inferred associations can be used to control an avatar that makes recommendations for navigating unexplored areas on a map. We conclude with some thoughts on the applicability of our methods to scenarios in the real world, beyond the simulation environment of a game, and on how the learned associations can be represented and queried by a simple question-answer type system.     

电大目标等离子体隐身的矩量法优化设计

根据高频散射特征,提出典型几何散射中心替代法,用于解决矩量法（MOM）用于电大目标等离子体隐身时的优化设计问题。以某典型电大目标为例,通过仿真分析了该方法的可行性。结果显示,电大目标覆盖利用该方法得到最优参数的等离子体后,不仅目标整体的单站RCS平均缩减与典型几何散射体的单站RCS缩减相当,且任意方向上RCS基本都有10dB左右的缩减,表明用该方法得到用于电大目标隐身的等离子体参数是可行的。     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.